Guide

How to Make Curtains Close Evenly on a Curtain Track

By The Quoya team · Last updated 20 November 2026

Short answer: on any curtain track, manual or motorised, only the first glider on each side is pulled, and the rest follow the fabric, so if the hooks are not evenly spaced the front pulls tight while the back stays bunched. The fix is to space your hooks evenly: divide your side of the track by the number of hooks minus one, use one glider for every hook, and link the hooks if your pleats are fixed.

How to Make Curtains Close Evenly (Pencil Pleat & Pinch Pleat) — Quoya Smart Electric Curtain Track
Watch: make your curtains close evenly, step by step (2:54).

Why only the front of the curtain pulls tight

The motor, or your hand on a manual track, pulls the lead glider on each side. Every other glider only moves when the fabric between it and the next one goes tight. With more fabric than track, the front stretches flat and the back stays bunched, so the two sides don't match.

Two curtains closing evenly and meeting in the middle on a Quoya curtain track
Evenly spaced hooks: both curtains close together and meet in the middle.

Work out the gap between hooks

Hook gap formula: side length divided by hooks minus one
Side length ÷ (hooks − 1) = your gap.
  1. Measure your side of the track.
  2. Count the hooks on that curtain.
  3. Divide the length by the number of hooks minus one. Example: 270 cm (8.9 ft) with 19 hooks = 270 ÷ 18 = 15 cm (about 6 in).
  4. Use one glider for every hook. Quoya box sets come with 8 gliders for every metre of track, so keep the gap at 12.5 cm (about 5 in) or more.

Pencil pleat curtains

Pencil pleat tape cords tied off, not cut
Tie the cords off, don't cut them.
  1. Tie a knot in the cords at one end of the tape so they can't pull through.
  2. Pull the cords from the other end and slide the gathers along until the curtain is as wide as its side of the track.
  3. Tie the cords off, but don't cut them, so you can adjust later. Spread the gathers evenly by hand.
  4. Put a hook in every 15 cm (or your gap), using the pocket nearest each mark.

Flat curtain with pleat tape

Pinch pleat hooks in pleat tape, one hook per glider
One hook, one pleat, one glider.
  1. Use pinch pleat hooks, the ones with four prongs.
  2. Mark the tape at your gap. At each mark, slide the four prongs up into neighbouring pockets from below.
  3. The fabric folds into a neat pinch pleat: one hook, one pleat, one glider.
  4. Start and finish with a hook right at the edges of the curtain.

Ready-made pinch pleat curtains

The pleats are already sewn, so you can't move them. Link the hooks with a string so they all move together.

Nylon string tied to each pinch pleat hook at an even gap
Loop, knot, next hook.
  1. Put one hook in the back of each pleat.
  2. Cut a thin nylon string a little longer than your side of the track and mark it at your gap with a pen.
  3. Tie the end to the first hook, the one on the lead glider, with a double knot.
  4. Loop the string round the next hook at the next mark and knot it. Carry on all the way along, keeping the string straight.
  5. Hang the curtain and run it. The string pulls every hook along together and stays hidden behind the fabric.

Wave (S-Wave) curtains

Wave curtains need the Quoya S-Wave runner set (sold separately, buckle tape or hook-on style). The runners are linked on a cord, so they are always the same gap apart. Do a dry run first: fit the track and runners, clip the tape onto every runner with no curtain, allow about two extra buckles or hooks at the gearbox so the curtain wraps round and hides the motor, then use the tape as the guide for your curtain. Already have wave curtains? Measure between two buckles: 125 mm needs the 60 mm set, 145 mm needs the 80 mm set.

How to Set Up S-Wave Curtains: The Dry-Run Method — Quoya QL600 Smart Electric Curtain Track
Watch: S-Wave dry-run set-up (1:34).

Questions

Why does only the front of my curtain move?
On every curtain track only the first glider on each side is pulled. The others follow the fabric, so space the hooks evenly or link them with a string.
Does this happen with manual curtain tracks too?
Yes. It is how all curtain tracks work, manual or motorised. The same fixes apply.
How many gliders come with a Quoya box set?
8 gliders for every metre of track. Use one glider per hook and keep the gap between hooks at 12.5 cm or more.
Will the string show?
No. It sits behind the curtain heading and folds up behind the curtain when it opens.
Do wave curtains need a string?
No. The S-Wave runner set links the runners on a cord at a fixed gap. Do the dry run with the tape first.

Next step